Frenzybro 10-Piece Front Control Arm & Steering Kit – See Exact Year, Engine & Steering Fitment

Installation Tip: Critical Stress Relief Step 1. After aligning the control arm, loosely install the bolts connecting to the frame and ball joint. 2. Lower the vehicle until the tires touch the ground, allowing the suspension to settle into its natural position. 3. Use a torque wrench to fully tighten the frame bolts and ball joint nut to OEM specifications. Importance: Skipping this step will leave the bushings under constant stress, leading to premature cracking, noise, or failure.

10-Piece Front Control Arm & Steering Kit

• 1 front left upper control arm with ball joint: K80306
• 1 front right upper control arm with ball joint: K80308
• 1 front left lower control arm with ball joint: K621267
• 1 front right lower control arm with ball joint: K621266
• 1 front left outer tie rod end: ES800515
• 1 front right outer tie rod end: ES800514
• 2 front inner tie rod ends: EV800457
• 2 steering rack bellows: K150291

Whole-kit vehicle fitment

All listed applications exclude SVT Raptor. Select the exact year and configuration below. Hydraulic Steering means hydraulic power steering; 2013 applications listed here require the V8 6.2L engine and hydraulic power steering. Expedition and Navigator applications are limited to 2009–2010.

Verify the vehicle configuration and replacement part references before installation.